Skip to main content

The Bathtub Refinishing Blog




Question? Should I reglaze my fiberglass bathtub or should I replace it?


Question? Should I reglaze my fiberglass bathtub or should I replace it?
Replacing an existing bathtub with a new bathtub is not as easy as it sounds. The original tub almost always needs to be cut into pieces causing for extensive, and expensive labor. flooring, trim, surrounds, and plumbing will also need to be replaced. While a new tub can cost as little as $200, labor expenses for the replacement process can easily add $2,500.00 or more to the bill.                                                               
Instead, many homeowners have the existing tub reglazed, which typically costs $300-$1,000, depending on area and process. Whether your bathtub is dingy and stained, or even if it sports some serious rust and cracks, a trained professional can likely fix and re-coat the surface for a like-new look. Cast-iron, steel, and fiberglass tubs and shower stalls can all be re-coated to match the original finish or in an entirely new color.
The refinishing process involves three steps.
  • First, the technician strips off the old finish and sands the tub to create a smooth surface.
  • Next, any holes, cracks, chips, or rust spots are repaired.
  • Finally, a primer, multiple layers of coating, and a sealant are applied. The bathtub can be used again within 24 hours, and the finish should last a min 15-20 years.
There are do-it-yourself reglazing kits available for less than $50, but this work is best left to a trained contractor like BathArt Refinishing - www.bathartrefinishing.com (800) 206-5958. These products don't use the same technology as the professionals, and the results are less durable and often look painted on rather than smooth.
Contact us today and ask about our current refinishing specials on bathtub reglazing, tile refinishing, sink reglazing, bathroom refinishing, shower reglazing, and nanotechnology coatings for glass, granite, and marble. Contact us today (800) 206-5958 - www.bathartrefinishing.com

Comments

Post a Comment

Popular posts from this blog

How Long Does Bathtub Refinishing Last? The Truth About Durability (Orlando Homeowner Guide)

If you’re considering bathtub refinishing in Orlando FL , one of the most common questions is: How long will it actually last? The short answer— when done professionally, bathtub refinishing can last 10–15 years or more. But the real answer depends on a few critical factors that most homeowners don’t fully understand. Let’s break it down. What Determines How Long Bathtub Refinishing Lasts? Not all refinishing jobs are created equal. The lifespan of your tub depends heavily on the process, materials, and aftercare. 1. Surface Preparation (The MOST Important Step) A proper refinishing job starts with deep preparation: Chemical cleaning and degreasing Mechanical sanding or stripping Repairing chips, cracks, and damage At BathArt Refinishing, we ensure every surface is taken down to a proper base when needed—this is the foundation of long-lasting results. 👉 Poor prep = peeling within months 👉 Proper prep = durability for years 2. Coating Quality Matters High-end coatings used in bathroom...
Post a Comment
Read more

Why Replacing a Bathtub Is So Expensive (And Why Refinishing Is the Better Option)

If you're thinking about upgrading your bathroom, you might assume replacing your bathtub is the best option. However, many homeowners in Orlando quickly discover that bathtub replacement can be surprisingly expensive. What seems like a simple project can quickly turn into a costly and time-consuming renovation. This is exactly why more homeowners are turning to bathtub refinishing and tile refinishing as a smarter alternative. Refinishing allows you to restore the beauty of your bathtub, tile, and other surfaces for a fraction of the cost of replacement — often with results that look just as good, or even better. At BathArt Refinishing , we specialize in premium bathtub refinishing, tile refinishing, sink refinishing, and countertop refinishing in Orlando, FL . As a veteran-owned and operated company , we focus on delivering premium-quality finishes that help homeowners transform their bathrooms without the stress and cost of full remodeling. Why Bathtub Replacement Costs So Much...
Post a Comment
Read more

BathArt Refinishing #1 Rated Refinishing Company in Central Florida

Don’t Replace it! Refinish it with Glass Coat Refinishing - (800) 206-5958 It’s financially worthwhile to refinish your tub versus paying for bathtub replacement or liner.  The difficulty with liners is that moisture becomes trapped in between the surface of the tub and the liner itself. This can lead to mildew, rust and mold, all of which weakens your bathtub. Bathtub Refinishing is clearly the best option for your bathtub! It will save you thousands of dollars and time. Replacing can take days sometimes weeks of messy, dirty, loud and expensive construction level work.  BathArt Refinishing artist’s, have the ability to reglaze your existing bathtubs or tiles and return those surfaces back to their original look. Our exclusive glass coat strengthens the surface extending the life by 30 years and reducing cleaning by 10%.  It’s clearly a no brainer. Don’t replace it! Reglaze it! The most return on a remodeling investment has been proven to be in the B...
5 comments
Read more